PY RX2510 M2 /2xXEON E5-2630V4/ COOLER KIT 2ND CPU/8x32 GB RG 2400 2R/ 2xSSD SATA 240GB MU/PSAS CP400E LP/ 2xPLAN CP 4X1

Popis produktu:

PRIMERGY RX2510 M2
Base unit PRIMERGY RX2510 M2
Housing types Rack
Storage drive architecture 4 HDD
Power supply Hot-plug
Product Type Dual Socket Rack Server

Mainboard
Mainboard type D3279-H
Chipset Intel® C612
Processor quantity and type 1 - 2 x Intel® Xeon® processor E5-2600 v4 product family-based platform
Processor Intel® Xeon® processor E5-2620v4 (8C/16T)
Memory slots 12 (6 DIMMs per CPU, 2 channels with 3 slots per channel)
Memory slot type DIMM (DDR4)
Memory capacity (min. - max.) 8 GB - 384 GB

Interfaces
USB 2.0 ports 1 x USB 2.0 (1x rear)
USB 3.0 ports 4 x USB 3.0 (2x front, 2x rear)
Graphics (15-pin) 1 x VGA (1x rear)
Serial 1 (9-pin) 1 x configurable as COM1 or Server Management COM interface (1x rear)
Management LAN (RJ45) 1 x dedicated management LAN port for iRMC S4 (10/100/1000 Mbit/s)
Data Sheet FUJITSU Server PRIMERGY RX2510 M2 Dual socket 1U rack server
Page 4 / 9 www.fujitsu.com/global/products/computing/servers/primergy/rack/rx2510m2/
Onboard or integrated Controller
RAID controller All hardware storage controller options are described under Components
SATA Controller Intel® C612
LAN Controller Intel® C612. LAN controller are integrated in optional I/O units, details are described under I/O options. All supported
features are described in relevant system configurator.
Remote management controller Integrated Remote Management Controller (iRMC S4, 8 MB attached memory incl. graphics controller), IPMI 2.0,
DCMI 1.5, SNMP 2.0, REST API 1.0 compatible
Onboard controller notes Onboard 4x S-ATA 6Gbit/s RAID Controller (RAID 0,1) for up to 4x S-ATA drives available

Slots
PCI-Express 3.0 x8 2 x Low profile
PCI-Express 3.0 x16 2 x Low profile (2nd CPU required for slot 4)
Slot Notes Slot 1 (internal): PCIe Gen3 x8 @CPU1 is dedicated for the modular RAID Controller.
Slot 2: PCIe Gen3 x8 @CPU1 for low profile cards with up to 167mm length
Slot 3: PCIe Gen3 x16 @CPU1 for low profile cards with up to 167mm length
Slot 4 standard: PCIe Gen3 x16 @CPU2 for low profile cards with up to 167mm length
Slot 4 option: PCIe Gen3 x16 @CPU2 for full height cards with up to 167mm length (!in this case, slot 3 is not
available)
Drive bays (Base unit specific)
Storage drive bays optional up to 4 x 3.5-inch (2.5-inch drives will be mounted into 3.5-inch drive cages)

Dimensions / Weight
Rack (W x D x H) 483 mm (Bezel) / 435mm (Body) x 770.7 x 43 mm
Mounting Depth Rack 748.2 mm
Height Unit Rack 1 U

Dimensions / Weight
19” rackmount Yes
Mounting Cable depth rack 200 mm (1,000 mm Rack recommended)
Weight up to 16 kg
Weight notes Actual weight may vary depending on configuration

Environment
Operating ambient temperature 5 - 40 °C (41 - 104 °F)
Operating temperature note Cool-safe® Advanced Thermal Design (above 35 °C or below 10 °C) depending on configuration. For detailed
information see relevant system configurator.
Operating relative humidity 10 - 85 % (non condensing)
Operating environment FTS 04230 – Guideline for Data Center (installation specification)
Operating environment link http://docs.ts.fujitsu.com/dl.aspx?id=e4813edf-4a27-461a-8184-983092c12dbe
Noise emission Measured according to ISO 7779 and declared according to ISO 9296
Sound pressure (LpAm) Noise minimum configuration: <31 dB(A) (idle) / <34 dB(A) (operating)
Noise typical configuration: <31 dB(A) (idle) / <36 dB(A) (operating)
Sound power (LWAd; 1B = 10dB) Noise minimum configuration: <4.7 B (idle) / <4.8 B (operating)
Noise typical configuration: <5.0 B (idle) / <5.2 B (operating)
Noise notes Noise emissions depends on operation modes, system configuration and ambient temperature.
Operating mode measured based on OLTIS with 50% load. *OLTIS = FUJITSU Load Profile which stresses all
components of a server with a given load level.
Electrical values
Power supply configuration 1+1 hot-plug power supply
Hot-plug power supply redundancy Optional
Active power (max. configuration) 510 W
Apparent power (max. configuration) 515 VA
Heat emission (max. configuration) 1836.0 kJ/h (1740.2 BTU/h)
Rated current max. 4.0 A (100 V) / 2.0 A (240 V)
Active power note To estimate the power consumption of different configurations use the Power Calculator of the System Architect:
http://configurator.ts.fujitsu.com/public/
Power supply 450W hot-plug, 94% (Platinum efficiency), 100-240V, 50 / 60Hz
800W hot-plug, 94% (Platinum efficiency), 100-240V, 50 / 60Hz

Stránky o produkte:

http://www.fujitsu.com/global/products/computing/servers/primergy/rack/rx2510m2/